Regal 38 EXPRESS Manuel du propriétaire télécharger pdf (Page 256)

Cosmetic Care & Maintenance

Inspect the thru-hull seacocks before each outing. Make

sure the connections between the output hose and the

valve are tight. Look for water leaks around the area where

the valve and hull meet.

Every 30 days open and close each thru-hull valve several

times. This will guard against the valve seizing in the open

or closed position. Also, make sure the valve handle is

tightly fastened. Secure any loose valve handles.

TYPICAL SEACOCK

OPEN

POSITION

CLOSED

POSITION

HANDLE

IN-LINE

Before servicing the sea water strainer make sure the

appropriate seacock has been closed to prevent water

entering the boat. If possible blow out the strainer basket

with compressed air or use a metal type brush to remove

any accumulated material from the screening material.

Make sure the strainer is centered on reinstallation.

Check all parts for wear and possible leaks including

any gasket surfaces. Do not overtighten the strainer

hold down fasteners which could cause strainer body

damage especiallyon the newer plastic versions. Use

original replacement marine parts only. After all parts are

reassembled open the seacock and check for leaks.

UNDERWATER HARDWARE-SEACOCKS &

STRAINERS

TYPICAL STRAINER

1 2 ... 251 252 253 254 255 256 257 258 259 260 261 ... 316 317

Pas de commentaire

Regal 38 EXPRESS Manuel du propriétaire Page 256