Regal 38 EXPRESS Manuel du propriétaire télécharger pdf (Page 248)

Cosmetic Care & Maintenance

OIL CHANGE SYSTEM

The oil changer system requires little maintenance up to

the 500 hour period. At that time the impeller needs to

be replaced. Earlier replacement may be necessary if the

oil changer has been operated dry, foreign objects have

broken the impeller vanes down, or improper liquids have

been run through the system. For impellers and gaskets,

call 1-800-922-4804. Refer to the vendor documents for

more information.

To change the impeller:

1. Remove the four screws(1).

2. Remove the cover plate (2) and old gasket (3).

3. With ﬁ ngers, remove damaged or worn impeller (4).

4. Clean the inside of the pump looking for foreign

materials and any partial impeller vanes that may be stuck

in the chamber. Also, check the hose barbs and hoses

leading to the outside for debris.

5. Apply Vasoline or similar lubricant to both the inside of

the pump head (5) and to the outside of the impeller (4).

6. Align the ﬂ at surface on the inside of the new impeller

with the ﬂ at surface on the motor shaft. Push into place

while twisting the blades in a clockwise direction.

7. Place the new gasket (3) on the pump body face, align

holes and replace cover (2). Tighten all 4 screws evenly.

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 316 317

Pas de commentaire

Regal 38 EXPRESS Manuel du propriétaire Page 248